Tutorial: Using Resin Epoxy DIY Beautiful Glitter Jewelry

Ladies have life hidden in jewelry. The most dazzling element in this universe for ladies is Jewelry. They can’t resist jewelry. And topping on the cake, if jewelry is packed with shimmers and glitters, the treat will be doubled. So, here is a tutorial, if you want to improvise the beautiful jewels of your own choice without even investing money or hard work. The DIY is so easy and budget friendly. All you need is a little patience and you’ll have stunning pieces of jewelry in your hands in 24 hours.

Ingredients:

1. Resin –There’s a lot of different resin. I used  The kit included small containers to mix the resin in as well as two stir sticks.
2. Open Frame Pendants – Both of these items that I used were found at Hobby Lobby. Michaels did not carry them at all that I could find.  You want ones that are solid all the way around.
3. Glitter– I used some fine glitter and some larger chunkier versions as well. 
4. Materials to protect your workspacewhen working with the resin such as a trash bag or plastic sheeting. I used tin foil covered with wax paper.
5. Blue Painters Tape – I tried clear packing tape and it did not work for me. 

Start by covering your workspace. Resin is permanent. Any drops will be there forever. 

One really important thing to mention: These pendents take 24 hours to dry and you want them to stay perfectly still for at least the first 12 hours. Either work in an area where they will not need to be moved or work on top of a tray or cookie sheet that you can very carefully move to a safe place once you are done. 

Once your workspace is ready, it’s time for the fun to start. 

Step One: Preparing the Resin

Resin actually comes in two separate bottles. In order for it to harden, you have to mix exact proportions of the resin together which creates the ability for it to dry hard and shiny. 

This is actually easier than it sounds. If you’ve ever poured liquid medicine into a medicine cup for a child, you can do this. 

The recommended minimum amount of resin to mix is 15 ml.  Which means that you would need to mix 8ml of the Resin mix and 8ml of the hardener mix together to make 16ml.  This amount will probably make about 4-6 pendants depending on the size of the frame that you use. 

Use a sharpie to mark on the small plastic mixing cup the exact amounts. For instance, mark a line at 8ml for your resin mix and then go up and make another mark at 16ml for your hardener mix. Pour in the resin mix first exactly to the 8ml line and then fill the cup the rest of the way with hardener. 

Once you have both parts of the resin poured into the measuring cup, slowly… and I mean sloooowly… mix the resin for 2 minutes. Why slowly? Because if you don’t you will stir air bubbles into it. You also want to scrape the sides of the mixing cup as you go. 

Once your resin is mixed, set it to the side for 5 – 10 minutes for it to thicken as you prepare the next step.

Step 2: Preparing the Frames for Resin

I bought two different kinds of frames but both of them needed a little bit of alteration. 

I bought one package of these frames which came with 6 frames in it but as you can see in the picture, the top of the frame had a little hoop inside the frame as well. I didn’t want this hoop inside of the frame so I used a pair of snips and removed it.

The second frame I bought actually came with glass that you could put inside the frame and then screw the frame closed. I just liked how it looked but didn’t want the glass. So I ditched the glass inserts but needed a way to close up the small separation in the frame. 

If the frame you’re using has any break in it, your resin will leak out of it. 

I used several coats of clear nail polish to close up the small break in the frame and this worked well. You might have to try around with other things. 

Once your frame is ready, it’s time to break out the blue painter’s tape. 

Tear off a piece of tape just slightly larger than the frame. Press the frame onto the tape and then flip it over and use something hard to really burnish the frame onto the tape. Make sure you get all of the edges, especially near the top of anywhere that isn’t perfectly flat.

Once that’s done use a two small pieces of tape to secure this to your work surface. You want it to stay flat and it’s easy to get your hand stuck in the tape and drag it. Taping it down helps keep it in one place.

Step 3: Pour the Resin

Now it’s time to get excited.

 Once all of your frames are ready, it’s time to pour the resin. 

Since this is already a super long post, I’m just going to go over the process. In my next post I’ll share details on how to get each individual look.

First add your glitter (this might vary a little depending on the finished look but we’re just going to start with this). Next take your resin and add a little tiny bit inside the frame. You’ll be shocked by how fast the frame fills up. You don’t want to overfill it and make it pour over the edge so go slowly and add a tiny bit at a time.

Use the stir stick or a tooth pick to spread out the resin to the edges of the frame. Add more resin until you’re happy with the look. 

You can pour the resin to line up flat with the edges of the frame or make it dome by adding a little bit more resin and making a nice curve on top. 

Once your resin is poured into the frames you might notice a few air bubbles. 

Use a straw and gently blow on the surface of the resin to pop these bubbles (the warmth from your breath pops them) but be careful not to get any moisture on the resin. 

After about 12 hours the resin will be soft and pliable. If you did have any spills out of the frame, you can use scissors at this point to trim off the excess resin. 

Step 4: Finish Up Your Resin Pendant

After 24 hours you can safely peel the tape off of the back of your pendant. (Confession: I couldn’t wait and pulled off the tape sooner because I was so excited.)

If there’s any sticky left on the back of the pendant from the tape, remove it with goo gone. 

Add jump rings to your pendants and hang them on a chain. 

That’s it! It’s intensive but so.. so…so worth it! 

The results are unbelievable and honestly, if you think these look good on your screen you should see them in person. 

This one is one of my favorites. You can’t tell as much from the picture but the glitter looks like it’s suspended in space and it gets deeper toward the bottom. There’s just so much depth and shimmer to it. 

Happy making!